Controllers and Transmitters

Our TX2000 is an intelligent transmitter/controller for reading pH and ORP sensors and programmable process control. The large LCD display shows pH/ORP value simultaneously with temperature. Compatible with all Sensorex combination-style pH and ORP sensors. Versatile mounting options for panel or wall mounting. Reliable pH/ORP monitoring and process control Simple sensor calibration High-accuracy measurements Compatible with all Sensorex combination-style pH/ORP sensors One year limited warranty Note: Transmitter is only compatible with sensors with tinned leads.

Our TCSTX online toroidal conductivity meter and 4-20mA transmitter is built for water treatment monitoring in aggressive chemical and coating applications. The unit features isolated outputs with user-programmable temperature compensation. Durable construction with enclosure rated at NEMA 4X (IP65). Simple installation for wall, pipe, panel, or rail mounting. Use with our  TCS3020 Toroidal Conductivity Sensor for online conductivity monitoring with minimal maintenance. Reliable process monitoring Simple system integration Perfect for use in all environments For use with toroidal conductivity sensors One year limited warranty Note: Transmitter is only compatible with sensors with tinned leads.

Le CX10 est une solution compacte et économique pour surveiller la conductivité ou la résistivité de l'eau. Boîtier 1/8 DIN, affichage LCD clair et sortie 4-20mA isolée, compatible avec capteurs à cosses ou fils étamés et compensation température 10k NTC.

The LPM100 is a durable, loop-powered 4-20mA display for use in process monitoring applications. Monitor various parameters, including UV transmittance, free chlorine, dissolved oxygen, and more. This large display meter can be mounted in various configurations – including pipe mounting with our pipe mount kit . Simple installation and operation make it an ideal solution for process read out monitoring. Compatible with Sensorex 4-20mA output sensors Durable for harsh environmental conditions Simple set up and operation User-friendly interface One year limited warranty

The SensoPRO Toroidal Conductivity Monitoring System delivers reliable conductivity monitoring with toroidal (inductive) sensor technology . The NEW  EX2000RS toroidal conductivity transmitter has one 4-20 mA output, an RS-485 serial interface for use with Modbus RTU or ASCII, and can display conductivity, percent concentration, TDS, and salinity. The durable Noryl-body TCS3020 Toroidal (Inductive) Conductivity / TDS Sensor is resistant to fouling, coating, and corrosion and requires virtually no maintenance. Most reliable conductivity / TDS monitoring Minimal sensor maintenance requirements Displays conductivity, TDS, % concentration, and salinity Robust integration with Modbus RTU or ASCII Sensorex Guarantee: One year limited warranty This rugged toroidal conductivity monitoring sys

NOW Available! Our TX3100 is an intelligent pH and ORP controller/transmitter for reading pH and ORP sensors and programmable process control. This controller replaces the TX3000 1/2 DIN pH/ORP controller and features an updated user interface with user friendly full text and graphical display. This makes operation, calibration, and maintenance easier for operators in treatment plants. The TX3100 also features a solution ground input for accurate readings in applications with ground loop issues. NEW graphical display shows sensor data and aids in the calibration process 2 programmable relays (Hi/Lo, Hi/Hi, or Lo/Lo) Solution ground input eliminates measurement errors caused by reference ground potentials Compatible with all Sensorex sensors with tinned leads and PT1000 RTD temp comp

NOW Available! Our TX3100 is an intelligent pH and ORP controller/transmitter for reading pH and ORP sensors and programmable process control. This controller replaces the TX3000 1/2 DIN pH/ORP controller and features an updated user interface with user friendly full text and graphical display. This makes operation, calibration, and maintenance easier for operators in treatment plants. The TX3100 also features a solution ground input for accurate readings in applications with ground loop issues. NEW graphical display shows sensor data and aids in the calibration process 2 programmable relays (Hi/Lo, Hi/Hi, or Lo/Lo) Solution ground input eliminates measurement errors caused by reference ground potentials Compatible with all Sensorex sensors with tinned leads and PT1000 RTD temp comp

Our CX3100 Conductivity Controller is an excellent choice for high temperature, high pressure applications. Compatible with our CS675 , CS676 , and CS700 stainless steel conductivity probes, the CX3100 is the only Sensorex controller with automatic temperature compensation up to 200°C. The CX3100 replaces the Sensorex CX3000, and features an updated user interface with user friendly full text and graphical display. Monitors conductivity, resistivity, TDS, or salinity 1/2 DIN Transmitter/Controller with full text and graphical display Ideal for use in high temperature applications (with stainless steel conductivity probes ) Automatic temperature compensation up to 200°C (PT1000 RTD)

Our CX2000 is a fully-featured conductivity controller and 4-20mA transmitter for reading contacting conductivity sensors and programming process control. Set points are easily selected for 2 relay outputs and 1 wash control. Sensor calibration is simple with preset standards. The large LCD display features auto-sense back-light technology for use in all environments, including cooling tower controller applications. Reliable process control Lightning fast sensor calibration Perfect for use in all environments Compatible with a wide variety of sensors One year limited warranty Note: Transmitter is only compatible with sensors with tinned leads and either 30k NTC or Pt1000Ω RTD temperature compensation.

Our TX20 Automatic pH Controller is a convenient and cost effective solution for monitoring and maintaining both pH and ORP. This controller allows you to save space in your panel with its small footprint 1/8 DIN case. You can also use the two on/off relay outputs to program process control, including management of alarms and chemical dosage systems. Easy to install 1/8 DIN Case Two on/off controls (relay outputs) Compatible with sensors that utilize spade lug connectors Clear LCD displays pH or ORP and temperature 100-240 VAC power supply Note: The TX20 Automatic pH Controller is only compatible with sensors that have spade lug connectors.

The CX20 conductivity controller is a convenient and cost effective solution for monitoring and maintaining conductivity. Save space in your panel with the small footprint 1/8 DIN case. Use the two sets of relay outputs to program process control, including management of alarms and chemical dosage systems. Easy to install 1/8 DIN Case Two sets of programmable relays for conductivity or resistivity Clear LCD displays conductivity, resistivity, or temperature 100-240 VAC power supply Note: Controller is only compatible with sensors that have spade lug or tinned lead connectors and 10k NTC temperature compensation.

Our TCSMA online toroidal conductivity transmitter without display is built for water treatment monitoring and aggressive process chemical applications. Ideally suited for applications in which 4-20mA signals are required and reliable performance is critical. The unit features isolated outputs with user-programmable temperature compensation. Durable construction with enclosure rated at NEMA 4X (IP65). Simple installation for wall, pipe, panel, or rail mounting. Use with TCS3020 Toroidal Conductivity Sensor or TCSP series PEEK Toroidal Sensors for online conductivity monitoring with minimal maintenance. Reliable process monitoring: Monitor conductivity using proven inductive measurement technology Simple system integration: Loop-powered (16-35V DC) with isolated 4-20mA output signal Perfect

The EX2000RS toroidal conductivity transmitter has one 4-20 mA output, an RS-485 serial interface for use with Modbus RTU or ASCII, and can display conductivity, percent concentration, TDS, and salinity. Use with either the durable Noryl-body TCS3020 Toroidal Conductivity / TDS Sensor or the TCS3020 PEEK Toroidal Conductivity / TDS Sensor.

NOW Available! Our TX3100 is an intelligent pH and ORP controller/transmitter for reading pH and ORP sensors and programmable process control. This controller replaces the TX3000 1/2 DIN pH/ORP controller and features an updated user interface with user friendly full text and graphical display. This makes operation, calibration, and maintenance easier for operators in treatment plants. The TX3100 also features a solution ground input for accurate readings in applications with ground loop issues. NEW graphical display shows sensor data and aids in the calibration process 2 programmable relays (Hi/Lo, Hi/Hi, or Lo/Lo) Solution ground input eliminates measurement errors caused by reference ground potentials Compatible with all Sensorex sensors with tinned leads and PT1000 RTD temp comp

Our TX2000 is an intelligent transmitter/controller for reading pH and ORP sensors and programmable process control. The large LCD display shows pH/ORP value simultaneously with temperature. Compatible with all Sensorex combination-style pH and ORP sensors. Versatile mounting options for panel or wall mounting. Reliable pH/ORP monitoring and process control Simple sensor calibration High-accuracy measurements Compatible with all Sensorex combination-style pH/ORP sensors One year limited warranty Note: Transmitter is only compatible with sensors with tinned leads.

Our TX105 is a fully-featured pH/ORP transmitter for use with pH and ORP sensors. The large display shows pH/ORP value simultaneously with temperature. Versatile mounting options for panel, DIN rail or pipe mount. Reliable pH/ORP monitoring Simple sensor calibration Automatic sensor maintenance alerts Compatible with a wide variety of Sensorex pH/ORP sensors One year limited warranty Note: Transmitter is only compatible with sensors with tinned leads.

Our CX105 conductivity transmitter is an isolated output 4-20mA industrial transmitter for reading contacting conductivity sensors. The CX105 transmitter also measures Resistivity and TDS. Easily power the unit with available two-wire power supply loop. This transmitter is ideal for connecting to a PLC for advanced control systems. The CX105 has versatile mounting options for wall or panel mount. With a dual display LCD, monitoring both the measuring value and the temperature is simple. Dual display shows the measuring value and temperature Compatible with a wide variety of contacting conductivity, resistivity, and TDS sensors One year limited warranty CE certified – compliant with European Community Standards

Our TX100 is a fully-featured pH/ORP transmitter for use with pH and ORP sensors. The large display shows pH/ORP value simultaneously with temperature. Versatile mounting options for wall, panel, DIN rail or pipe mount. Reliable pH/ORP monitoring Simple sensor calibration Automatic sensor maintenance alerts Compatible with a wide variety of Sensorex pH/ORP sensors One year limited warranty Note: Transmitter is only compatible with sensors with tinned leads.

Our TX20 Automatic pH Controller is a convenient and cost effective solution for monitoring and maintaining both pH and ORP. This controller allows you to save space in your panel with its small footprint 1/8 DIN case. You can also use the two on/off relay outputs to program process control, including management of alarms and chemical dosage systems. Easy to install 1/8 DIN Case Two on/off controls (relay outputs) Compatible with sensors that utilize spade lug connectors Clear LCD displays pH or ORP and temperature 100-240 VAC power supply Note: The TX20 Automatic pH Controller is only compatible with sensors that have spade lug connectors.

The TX10 pH and ORP transmitter is a convenient and cost effective solution for pH and ORP monitoring. This transmitter allows you to save space in your panel with the small footprint of its 1/8 DIN case. The isolated, reversible 4-20mA output of the transmitter provides versatility for a range of process control possibilities. Easy to install 1/8 DIN Case 4-20mA current output Compatible with sensors that utilize spade lug connectors Clear LCD displays pH or ORP and temperature 100-240 VAC power supply Note: The TX10 pH and ORP transmitter is only compatible with sensors that have spade lug connectors.